[Info-vax] resesetting MP of RX4046 to factory settings

[Eberhard Heuser]

Am 07.03.2012 08:13, schrieb joukj:
> Hi all,
>
> I have 2 questions on the reset button for the MP of a RX4640:
>   1) According to the manuals it is located on the base-board, somewhere
>      underneath the power supplies. The only way to press this button as
>      I can see is to switch off the machine, Take out the base-board and
>      push the button. Is this the way to do it?

No, do not take out the board. You can press the reset buttom even if
the machine is up and running.

>   2) If I push the button for a few seconds according to the manual it
>      resets some user-feature to default. The manual only mentions
>        -user accounts
>        -baud rate serial port

The Admin password is set to the default.
The baud rate is fixed: 9600 N1.

>      Does this mean that the settings of the LAN are not reset.
>      If this is the case, how can this be done apart from making a
>      connection via the serial line?
>

If you don't know the LAN-configuration you have to use the
serial line.

Hope this helps
Eberhard